With superior optics and particle detection system, TSI's DPM test systems also offer accuracy and resolution down to 1ug/m3 versus 100ug/m3(0.1mg) or worse on some competitive systems. That is a factor of 100times better resolution when compared to some competitive systems.
TSI systems represent the very latest technology with all digital signal processing and a USB interface versus old RS232 still found on some competitive systems. TSI systems also provide a multitude of popular latest generation communication options, including Ethernet, 4-20mA, voltage outputs, a relay contact closure & USB for connection to almost any data logging, SCADA or telemetry system. The AVT533 represents rock solid and constantly evolving technology. It is simply the smartest investment for any organisation undertaking exhaust diesel particulate measurements.
Another great feature of the AVT533 is the built-in 60,000 point data logger,allowing clients to log and later view or print out test results. Our systems also feature a large 5.7" touch screen graphical VGA color display, variable flow rate (up to 3 lpm) for better particle transport, a built-in latest generation 10:1 dilution system, a precision thermal conditioner, impressive5 hour operation time and many other popular enhancements.
Proper calibration of any optical electronic device of this type is absolutely paramount to ensure accurate, reliable & repeatable measurements.Kenelec Scientific has decades of experience with optical electronic particle counting and sizing instruments. With advanced service facilities and full NATA & ISO21501 accreditation in the calibration of optical particle counting / sizing instruments, no other company comes close to matching the experience and capabilities that Kenelec Scientific offers in Australasia.
Checking flow rates or using zero filters in the field is not enough. In following global standards, all instruments of this nature need to be calibrated on an annual basis, in the laboratory by experienced optical electronic technicians. Unlike some competitive companies that send equipment overseas for repairs or calibrations or do sub standard calibrations / verifications in the field, Kenelec Scientific sells, services, fully calibrates and supports all of our systems locally in Australia to the highest possible standards.
KEY FEATURES
- 100nm to 15um particle size range
- 10:1 advanced dilution system for DPM measurements
- Built-in thermal conditioner for DPM measurements
- 0.001 to 1,500mg/m3 particle concentration range (10:1 dilution)
- Fully compliant with both DNEPM & MDG29 Australian guidelines
- Uses the latest 90 degree light scattering technology
- 0.001 mg/m3 high resolution measurements
- Built-in pump, 3 lpm flow rate, (variable from 1.4 to 3 lpm)
- 3 lpm flow rate providing better particle transport
- 60,000 point data storage (once a minute for 45 days)
- 5.7 inch real-time VGA colour graphical touch screen display
- Fully menu driven and easy to use
- Excellent correlation with laboratory reference instruments
- Patented sheath air system & recessed optics
- Developed in Australia for regulators & industry professionals
ENHANCED FEATURES
- Built-in water pump to eliminate water / moisture problems
- Handles exhaust temperatures up to 500 degrees C
- Suitable for steady state or transient test measurements
- 60 second smart auto zero function (done before each test)
- Operates for up to 5 hours off internal battery
- Additional 12 volt DC power input connection
- 240 volt mains powered operation, charger supplied
- Includes powerful Windows based analysis software
- Results expressed as elemental carbon in ug/m3 & mg/m3
- 5m long sample hose to comply with industry standards
- Rugged dust proof, water resistant, NEMA 4 enclosure
- Field adjustable calibration factor adjustments / capabilities
- Optional SMS & Email messaging & remote telemetry
- Single operator use, quick disconnect sample probe
ENHANCED FEATURES
- Built-in water pump to eliminate water / moisture problems
- Handles exhaust temperatures up to 500 degrees C
- Suitable for steady state or transient test measurements
- 60 second smart auto zero function (done before each test)
- Operates for up to 5 hours off internal battery
- Additional 12 volt DC power input connection
- 240 volt mains powered operation, charger supplied
- Includes powerful Windows based analysis software
- Results expressed as elemental carbon in ug/m3 & mg/m3
- 5m long sample hose to comply with industry standards
- Rugged dust proof, water resistant, NEMA 4 enclosure
- Field adjustable calibration factor adjustments / capabilities
- Optional SMS & Email messaging & remote telemetry
- Single operator use, quick disconnect sample probe
DOWNLOADS
