Part Number: 81-8018-50


The SDM-6000 is a versatile maintenance tool that automates the service of a GX-6000 portable gas monitor. This docking station can be used as a stand-alone device for charging, calibration and bump testing, with all the records stored automatically for future upload to a PC via SD card (PC software and SD card are included).

List of Benefits

  • Stand alone operation (no PC required)
  • Charge, bump, calibration or individually test alarms
  • Automatically power instruments on for scheduled calibration
  • Accepts GX-6000 with or without rubber boot
  • Can test and charge up to 10 units simultaneously
  • Accept up to 6 gas cylinders


Not only does it ensure easy and accurate record keeping for singular units the SDM-6000 will keep you on top of management of your entire fleet. The SDM-6000 calibration stations are modular by design enabling them to easily connect to each other without the need for any tubes or cables. One power source and one set of calibration equipment can provide service for up to 10 SDM-6000 calibration stations. Up to 10 calibration stations can also be connected to one PC for automated charging, calibration, bump testing and archiving of collected data. Even if the instruments are turned off, automated routines will power up the instruments and run as scheduled ensuring easy, stress free management. All data collected from the PC controlled software can also be centralised in one network location accessible by anyone with the PC controlled software with access to the network location.

SpecificationDetail Description
Size 13 x 33 x 18 cm / 5.11 x 13 x 7.2 in.
Weight Approx. 1.7kg / 3.7lb
Temperature -17 to +40°C / 0 to +104°F
Humidity 0% - 95% RH (non-condensing)
Display Touch panel TFT liquid crystal, back light LED 3 colour (Green, Red, Orange), each status is indicated by lighting/blinking
Power (AC adapter) 100-240VAC ~ 50/60Hz
USB printer port A type Connected with a printer via USB cable
RJ-45 connector Ethernet port for a LAN connection
SD card slot Compatible with SD & SDHC cards
Joint connector Connecting SDM-6000 (max 10 units) and SV-3
Inlet 4 inlets Gas 1 / Gas 2 / Gas 3 / Air
Software PC controller software included as standard. Windows 7 & 10 compatible
Certification CE marking
Bump test & Calibration
Setting Range
AIR Flush time 15~120 sec
GAS time 20~120 sec
AIR purge time 5~120 sec
Threshold value ±10~50% (BUMP test only)
Auto calibration On/Off (BUMP test only)
Auto alarm function check On/Off
Auto print On/Off
Bump test result Displayed on TFT liquid crystal
Calibration result Displayed on touch screen display
Standard functions Charging, Cal. Cap fitting status monitoring, Power ON function, Alarm activation check, Multilanguage, backlight adjusting, buzzer function, self-diagnosis for instrument connection.
Standard accessory Operating manual, filter, connecting plate, wall mount plate, PC controller software
Optional accessory SV-3 solenoid valve adds 3 additional calibration gas inputs, AC adapter (either 50W or 100W output), Calibration station utility software, tubing, calibration gas & regulators, Battery powered printer

Share this