65 Series

 

*This product has been updated to one of GasTech’s latest digital series of gas detectors the  C-GuardTM

 Please click on this link to bring you to the C-Guard series of detectors.

GasTech Australia has used the latest electrochemical technology for the detection of a large number of gas in ppm and ppb levels.

The GasTech’s unique CO sensor has a built in generator cell which will generate a small amount of interference gas over the sensor giving the user a confidence check that the sensor and system is operating as required.

The Built In Test (BIT) is simply activated by placing a magnet between “GAS TYPE” and “RANGE” on the front cover until the green LED starts to brighten. If the BIT is successful and everything is working correctly the green LED will change to Red for a few seconds then returns to Green for normal operation. This gives the user indication that the BIT was successful. Once the test is complete the green LED will dim and the sensor will return to normal operation within 60 seconds. This feature is only compatible with our CO sensors.

Key Features

  • Simple user friendly calibration procedure for routine calibrations
  • Tamper proof construction
  • GasTech large range of standard sensors
  • RFI/EMI Resistant powder coated protective case
  • Gas concentration indicator
  • MTBF 10 years on electronics
  • 10-30VDC operation
  • 4-20mA source output
  • In built automatic sensor test with indication and confirmation (BIT)
  • -20C to +50C operating temp

Gases Detected

Gas Part Number
Ammonia (NH3) 0 to 100 ppm in 1 ppm increments 65-1001-NH3
Carbon Monoxide (CO) 0 to 5000 ppm in 1 ppm increments 65-1001-CO
Chlorine (CL2) 0 to 10 ppm in 0.1 ppm increments 65-1001-CL2
Hydrogen (H2) 0 to 100 ppm in 0.5 ppm increments 65-1001-H2
Hydrogen Cyanide (HCN) 0 to 50 ppm in 1 ppm increments 65-1001-HCN
Hydrogen Sulfide (H2S) 0 to 200 ppm in 1 ppm increments 65-1001-H2S
Hydrogen Cloride (HCL) 0 to 200 ppm in 1 ppm increments 65-1001-HCL
Nitric Oxide (NO) 0 to 100 ppm in 1 ppm increments 65-1001-NO
Nitrogen Dioxide (NO2) 0 to 10 ppm in 0.1 ppm increments 65-1001-NO2
Phosphine (PH3) 0 to 1 ppm in 0.01 ppm increments 65-1001-PH3
Sulfur Dioxide (SO2) 0 to 10 ppm in 0.1 ppm increments 65-1001-SO2
Ethylene Oxide (ETO) 0 to 20 ppm in 0.1 ppm increments 65-1001-ETO
Ozone (O3) 0 to 2 ppm in 0.01 ppm increments 65-1001-O3
Oxygen (O2) 0 to 25% in 0.1 %Vol increments 65-1001-O2
 

Share this