Part Number: 72-8050-O2NE

O2NE+ Detector

The O2NE+ is an oxygen depletion monitor ideal for use where there is threat of a potential leak or build-up of inert gas such as: Nitrogen, Argon, Helium. The O2NE+ provides two audio visual alarms which are pre-set at 19.5% and 18%

List of Benefits

  • Up to 10year life on O2 cell
  • Calibration period of 12 months
  • "Plug and Play" ready to go
  • Repeater included for remote warning ability
  • Suitable for Helium detection

 
The O2NE+ is an oxygen depletion monitor ideal for use where there is threat of a potential leak or build-up of inert gas such as:
  • Nitrogen
  • Argon
  • Helium
The O2NE+ provides two audio visual alarms which are pre-set at 19.5% & 18% (but can be adjusted) to warn personnel of a potential leak which may cause the O2 levels to deplete to a dangerous level.

The use of inert and speciality gases is widespread and varied and includes many industries and processes, the applications of which throughout the medical market are listed below. Should there be a leak or build-up of these gases in a confined space this will deplete the level of oxygen and can pose a danger to employees and members of the public visiting your workplace.

  • MRI rooms (Helium is used as a coolant for a superconductors in MRI machines)
  • Cryopreservation (LN2 used for blood, sperm and egg preservation)
  • Tissue preservation
  • Deep freeze – pathology
  • Breathing observation – Asthma, Emphysema (Helium)
  • Cancer treatment (Argon lasers)

The O2NE+ main sensor unit is wall mounted at normal working head height in the area/s recommended as a result of risk assessment (often where the gases are stored and/or piped). The repeater unit/s (which take their power from the main unit) are then situated at the entrance/s to the area to let staff or visitors know if it is safe to enter or not.

SpecificationDetail Description
Measurement technique O2-partial pressure electrochemical cell with atmospheric pressure compensation
Range O2
Analyser type Fixed
Supply Voltage 230V AC, 110V AC, 9 to 24V DC
Operating Temperature 0 to 40 °C
Power consumption < 5 Watts
Display 4 digit LCD
Dimensions Analyser 175 x 110 x 75mm, Repeater 72 x 170 x 45mm
Output options 4 to 20mA, 2 x relays, 0 to 1V
Dimensions 175 x 110 x 75mm (analyser) 72 x 170 x 45mm (repeater)
Sounder 85dbA @ 10cm
Alarm 18.0% Alarm, 19.5% Alarm
Options 4 to 20mA, 0 to 1V, 2 x relays
Warranty 2 years
IP Rating Analyser IP65, Repeater IP65 (quick connect IP43)
Certifications and approvals EMC Directive 89/336/EEC (EN50270:1999, EN61000-6-3:2001+A11:2004) Low Voltage Directive 73/23/EEC (BS EN 61010-1:2001, IEC 61010-1(2ed)) AS61010.1-2003 (Australia & New Zealand) CSA (cCSAus ), Master Contract 239512, Certificate 1909026 *Oxygen sensor lives are affected by variables such as the amount of oxygen they are exposed to and the environmental temperature and humidity.
 

Share this