Eagle 2

The EAGLE 2 is equipped with features that are not available on competitive units and does more than just offer the standard confined space protection. One of the new features of the EAGLE 2 is a PID sensor for detecting high or low ppm levels (0-50 & 0-2,000) of VOC gases.

List of Benefits

  • Monitor up to 6 different autoranging gases
  • PPM / LEL hydrocarbon detection
  • PID (Photo Ionization Detector) low and high range for VOC detection
  • Infrared Sensors available for CO2, % LEL CH4,
  • % Vol. CH4, % LEL HC, % Vol. HC
  • TC (Thermal Conductivity) sensor available for % Vol. H2 or % Vol. CH4
  • Plug and play, smart toxic sensors


The EAGLE 2 features include a PID sensor for detecting high and low ppm levels (0-50 & 0-4,000) of VOC gases; % volume capability for CH4 and H2 using a TC (thermal conductivity) sensor; PPM or LEL hydrocarbon detection at the push of a button; infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges; methane elimination feature for environmental applications; and a variety of super toxic gases and measurable ranges. The EAGLE 2 has a strong internal pump with a low flow auto pump shut off and alarm, which can draw samples from up to 38 metres. This allows for quick response and recovery from distant sampling locations. The EAGLE 2 will continuously operate for over 16 hours on alkaline batteries or 20 hours on Ni-MH. A variety of accessories are also available to help satisfy almost any application such as long sample hoses, special float probes for tank testing, and dilution fittings, to name a few. Datalogging is a standard feature for all sensors on all versions. With its ergonomic design and large glove friendly buttons, the EAGLE 2 offers easy access to controls such as autocalibration, alarm silence, demand zero, peak hold, methane elimination, and a wide variety of other features. Each channel has two alarm levels plus TWA and STEL alarms for toxic channels. The two alarm levels are adjustable and can be latching or self resetting. Rugged, reliable, easy to operate and maintain, the EAGLE 2 is the solution for just about any portable gas monitoring situation. The display can also be set to any of 5 languages: English, French, German, Italian, or Spanish.


  • Hundreds of configurations
  • Displays in 5 languages
  • Powerful long-life pump up to 38m range
  • Low flow pump shut off and alarm
  • Methane elimination for environmental use
  • Alkaline 16 hours or Ni-MH 20 hours capability
  • Password protection
  • Datalogging standard
  • IrDA communications port
  • Autocalibration
  • Internal hydrophobic dust filter
  • External probe with hydrophobic filter
  • Ergonomic RFI / EMI / chemical / weather resistant enclosure
  • Intrinsically safe design, CSA approval
SpecificationDetail Description
Enclosure Weatherproof, chemical resistant, RFI/EMI coated high impact polycarbonate- polyester blend. Can operate within 5cm of water without leakage. Ergonomically balanced with rugged top mounted handle. Water & dust resistant equivalent to IP65.
Dimensions 24cm x 13.3cm x 14.9cm (L x W x H)
Weight 1.7 kg (standard 4 gas with batteries)
Detection Principle Catalytic combustion, electrochemical cell, galvanic cell, infrared, photo ionization detector and thermal conductivity.
Sensor Life Two (2) years under normal conditions.
Sampling Method Powerful, long-life pump (over 6000 hours) can draw samples over 38 metres. Flow rate approximately 2.0 SCFH (standard cubic feet / hour)
Display 3 display modes: display all gases, large font-autoscroll or large font-manual scroll. Polyurethane protected overlay. Backlight, illuminates for alarms and by demand with adjustable time.
Language Readout can display in 5 languages (English, French, German, Italian or Spanish)
Alarms Two (2) alarms per channel plus TWA and STEL alarms for toxics. Fully adjustable for levels, latching or self reset and silenceable.
Alarm Method Buzzer 90 dB at 30cm, four high intensity LED’s.
Controls Four (4) external glove friendly push buttons for operation, demand zero, and autocalibration. Buttons also access LEL/ppm, alarm silence, peak hold, TWA/STEL values, battery status, conversion factors and many other features.
Continuous Operating Hours At 21°C, 16 hours using alkaline batteries, or 20 hours using NiMH.
Power Source 4 alkaline or NiMH, size C batteries (Charger has alkaline recognition to prevent battery damage if charging is attempted with alkalines)
Operating Temp & Humidity -20°C to 50°, 0 to 95% RH, non-condensing.
Indication Accuracy Maximum variance +5% of full scale.
Response Time 30 seconds to 90% (for most gases) using standard 1.5 metre hose
Safety Design Intrinsically safe, Class I, Division 1, Groups A, B, C and D. Approvals
Standard Accessories Shoulder strap, alkaline batteries, hydrophobic probe and 1.5m hose, internal hydrophobic filter
Special Features Low Flow alarm shuts pump off to avoid damage to instrument , Hydrophobic filter disc in probe, Internal hydrophobic filter, Single gas calibration capability, Methane elimination switch for environmental applications, Security Password protected, Meets EPA Method 21 protocol for fugitive emissions testing (most applications), Plug and play toxic sensors, Datalogging available for all configurations, Transformer gas testing version available
Optional Accessories Dilution fitting (50/50) , NiMH Batteries, Battery charger, 220 VAC or 12 VDC (charge time 4 hours), Continuous Operation Adaptor, 12 VDC, Extension Hoses, Stand Alone Docking Station
Warranty Two year material and workmanship, one year for PID sensor

Share this