SP220 and SP220C
The SP-220 gas leak check range is a simple to operate unit with high sensitivity to a variety of gases. The SC version (SP-220SC) is able to detect super-toxic, combustible and Freon based gases…a total of 40 all together! An alternative variant exists especially for fumigation type gases (SP220).
List of Benefits
- Target gas selectable from a list of 40 gases (Type SC) and 7 gases (Type FUM)
- Calibration to only one gas (PH3) is needed
- Data logging / Snapshot logging
- High speed, low concentration readings
- Sensor detects as low as 0.1ppm
- Up to 12 hours of continuous operation
- Impact-resistant rubber protective over-mold
- IP-55
- Two (2) visual LED alarms
- LED torch light
The range comes with many new features including an LED light, ingress protection to IP-55, and snapshot data logging. Data logging is easily downloaded onto a PC via USB.
The lightweight yet robust design weighs in at just 215g making it the ideal alternative to gas detection tubes. Powered by 2 x AA batteries the unit is ready to go and not held back by being out of charge, giving up to 12hours run time.
When detecting leaks the unit is able to change sensitivity levels depending on the gas chosen, ensuring the best possible indication of leak size.
Built with a new sensor resistant to silicone poisoning and a new charcoal filter this new instrument is the latest in Gas Leak Checker technology.
Contact our friendly sales team for more information regarding specific requirements.
The lightweight yet robust design weighs in at just 215g making it the ideal alternative to gas detection tubes. Powered by 2 x AA batteries the unit is ready to go and not held back by being out of charge, giving up to 12hours run time.
When detecting leaks the unit is able to change sensitivity levels depending on the gas chosen, ensuring the best possible indication of leak size.
Built with a new sensor resistant to silicone poisoning and a new charcoal filter this new instrument is the latest in Gas Leak Checker technology.
Contact our friendly sales team for more information regarding specific requirements.
| Specification | Detail Description |
|---|---|
| Size | 20 x 4.7 x 4.3 cm / 7.8 x 1.8 x 1.7 in. (Taper nozzle not fitted ) |
| Weight | 215 g / 7.5 oz. |
| Temperature | -20 to +55°C / -4 to +131°F |
| Humidity | 0% - 95% RH (non-condensing) |
| Display | LCD |
| Power source | Two (2) AA dry cell batteries |
| Typical battery life | Up to 12 hours |
| Ingress Protection | IP 55 |
| Detection principle | Hot-wire semiconductor method |
| Sensor | SH-8662 |
| Measuring range | *Dependent on target gas |
| For more specific details on gases please see individual specification documents under downloads tab. |