Tango TX1

DUALSENSE™ TECHNOLOGY SIGNIFICANTLY INCREASES WORKER SAFETY, REGARDLESS OF BUMP TEST FREQUENCY. By wearing the Tango™ TX1 Portable gas detector, your workers will be the safest single gas monitor users in the world. A 2-year runtime and patent pending DualSense™ Technology increases worker safety, regardless of bump test frequency, while reducing overall costs.

List of Benefits

  • DualSense® Technology increases worker safety by using two sensors to detect the same gas
  • Guaranteed for Life™ with replaceable sensors and batteries that extends the life of the instrument
  • Optional AlarmAmp™ increases audible alarms to 110dB
  • DSX compatible for easy mantenance

 

Significantly increases worker safety -

DualSense Technology ensures that regardless of your current bump test policy, you will be significantly safer with the Tango than with any other single gas instrument on the market today. *

Longer battery life -

Operates continuously in an “always-on” mode for two years. After the battery can no longer support instrument life, it can be replaced for another two years of continuous operation.

Louder instrument alarm -

Alarms at 100dB at 10 centimeters making it twice the volume of Industrial Scientific’s GasBadge units and louder than any single gas instrument on the market. Alarm volume can be increased by about 10dB for higher-noise environments with the addition of the optional AlarmAmp™

The Tango incorporates revolutionary patent pending DualSense™ Technology, which was developed to address one of the biggest challenges facing single gas instrument users - bump testing instruments to ensure they are properly detecting gas and alarming. DualSense Technology includes two of the same type sensor for detection of a single gas. The two sensor readings are processed through a proprietary algorithm and displayed as a single reading to the user.
SpecificationDetail Description
SENSOR MEASURING RANGES
Carbon Monoxide (CO) 0 to 1,000 ppm in 1 ppm increments
Carbon Monoxide (CO/H2 low) 0 to 1,000 ppm in 1 ppm increments
Hydrogen Sulfide (H2S) 0.0 to 500.0 ppm in 0.1 ppm increments
Nitrogen Dioxide (NO2) 0.0 to 150.0 ppm in 0.1 ppm increments
Sulfur Dioxide (SO2) 0.0 to 150.0 ppm in 0.1 ppm increments
GENERAL SPECIFICATIONS
Display Segment liquid crystal display (LCD)
Keypad Two buttons
Case Materials Case top
Case bottom Conductive polycarbonate
Alarms Three strobe-emitting visual alarm LEDs (two red; one blue)
100 decibel (dB) audible alarm at a distance of 10 cm (3.94 in)
Vibration alarm
Dimensions 99 x 51 x 35 mm (3.9 x 2.0 x 1.4 in)
Weight 126.0 g (4.4 oz)
Temperature Range -40 °C to 50 °C (-40 °F to 122 °F) †
Humidity Range 15%-95% Non-condensing (continuous)
Sensors CO, CO/H2, H2S, NO2, SO2 – Electrochemical sensor technology
Battery 3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; non rechargeable; always on; up to 2-year run time depending on operating conditions
Data Logging 3 months at 10-second intervals
Event Logging 60 alarm events
Warranty Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for three years. All other sensors are warranted for two years.
CERTIFICATION
Ingress Protection IP66; IP67
-40 °C to 50 °C (-40 °F to 122 °F)
ATEX Ex ia I Ma; Ex ia IIC T4 Ga; Equipment Group and Category - I M1 and II 1G
CSA Class I, Groups A B C D T4; Ex ia IIC T4
IECEx Ex ia I Ma; Ex ia IIC T4 Ga
UL (C-US) Class I, Groups A B C D T4; Class II, Groups E F G; Class I, Zone 0, AEx ia IIC T4
INMETRO Ex ia I Ma; Ex ia IIC T4 Ga
-20 °C to 50 °C (-4 °F to 122 °F)
China Ex Ex ia IIC T4 Ga
CMA Ex ia I Ma; H2S, CO
KC Ex ia IIC T4
EAC PO Ex ia I X; 0 Ex iX IIC T4 X
 

Share this