Gas Transmitters

We have used the latest electrochemical technology for the detection of a large number of gases. Please note that there are a broad number of possible configurations available for each of our products, and that they can be configured to meet the needs of a number of industries and applications. If you ever have any questions as to whether our products can meet your specific needs, please don't hesitate to contact us. Remember, we're with you each step of the way.

    Li-ion Tamer Multi Output System

    The Li-ion Tamer Multi Output System is an integrated off-gas detection and interface solution designed... Read More

    Li-ion Tamer Gen 3 Gas Sensors

    Li-ion Tamer Gen 3 Gas Sensors are designed to detect lithium-ion battery electrolyte solvent vapours released during an off-gas event... Read More

    D-Guard²S

    Designed from the ground up to provide reliable, accurate and flexible gas detection, the D-Guard²S incorporates leading edge technology. ... Read More

    D-Guard²R

    D-Guard²R comes standard with a built in relay board. This includes 3 relays; 2 for the low and high alarms set within the transmitter and a third for fault. ... Read More

    D-Guard²

    D-Guard² offers world leading 2-wire loop powered NDIR methane and carbon dioxide monitoring capability, allowing greater numbers of detectors to be driven from smaller power supplies, reduced cable diameters... Read More

    C-Guard

    Gastech has released the latest series of GasTech’s digital gas detectors the C-GuardTM. This new style of gas detector uses an advanced processor and program logic.... Read More

    Titan 2

    The Titan 2 is a fixed benzene gas monitor designed for continuous, real-time monitoring in high-risk industrial environments. ... Read More

    RAEGuard 3

    The Honeywell RAEGuard 3 is a high-performance fixed gas detector that provides continuous monitoring of toxic and combustible gases, VOCs, and oxygen in hazardous areas. ... Read More

    RAEGuard Lite

    RAEGuard Lite is a cost-effective, fixed gas detector for flammable, toxic, and oxygen gases. With reliable performance, flexible output options, and a compact, explosion-proof design, it’s ideal for safe gas monitoring across industrial environments.... Read More

    S-Guard Tx

    The Gastech GTD-2000Tx is part of the S-Guard TM smart transmitter series and includes instruments for both toxic gas detection and oxygen concentration monitoring. The sensing element technology provides long operational life... Read More

    S-Guard Ex

    GasTech Australia Smart Guard series S-GuardTM Series GTD-2000Ex hydrocarbon Gas detector is a catalytic smart  transmitter. The sensing and reference elements are self-compensating... Read More

    B-Guard Millennium CO2

    Gastech Millennium infrared carbon dioxide detector is a single source dual wavelength instrument. The sensing and reference elements are self-compensating for optical integrity and other signal inhibitors. The industry standard 4-20mA analog output... Read More

    B-Guard Millennium LEL

    Gastech Millennium Series Infrared hydrocarbon detector is a single source dual wavelength instrument. The sensing and reference elements are self-compensating for optical integrity and other signal inhibitors. ... Read More

    B-Guard Catalytic

    Gastech has used the latest low power switch mode technology for the detection of combustible gas in LEL and ppm levels. This unique amplifier has a built in capabilities to be either a 4-20mA source or sink, simply by the positioning... Read More

    Sensepoint XCD

    The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. ... Read More

    RAEGuard 2 PID

    The RAEGuard 2 PID is a fixed photoionization detector (PID) that measures a broad range of volatile organic compounds (VOCs). The RAEGuard 2 PID operates on 10 to 28 VDC and provides an analog (4-20mA) three-wire signal output, ... Read More

    Airscan IRF9

    The industrial refrigeration industry is changing rapidly. The manufacture of R-22 and other HCFCs are being phased out, and manufacturers of cooling systems are introducing new equipment that runs on 407a, 422d, 410a, NH3 and CO2.... Read More

    Ax60K

    Carbon dioxide (CO2) is stored and used in fast food kiosks for the carbonation and dispense of beverages. CO2 is a toxic gas that is colourless and odourless and not detected by human senses.... Read More

    H-Guard

    The H-Guard is a CO2 transmitter series designed to be installed in HVAC applications. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More

    H-Guard-D

    The H-Guard-D is a CO2 transmitter series designed to be installed in HVAC return air ducts. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More

    H-Guard-L

    The H-Guard-L is a CO2 transmitter series designed to be installed in HVAC applications. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More

    AX60+

    The CO2 and O2 sensors are interchangeable and can be fully integrated as part of a multi-point, multi-gas detection and alarm system.... Read More

    FALCO 2 11.7

    Reliable VOC detection with ION Science’s trusted 11.7 eV photoionisation sensor. FALCO has been specifically engineered to work within condensing atmospheres and extreme weather.... Read More

    S-Guard Ir

    GasTech Australia Smart Guard series S-GuardTM Series GIR-3000 hydrocarbon detector is a single source dual wavelength instrument. The sensing and reference elements are self-compensating... Read More