Gastech

Read more about POLI MP400 / MP400P The POLI multi-gas detectors offer up to 6 gas monitoring of toxic gases, Oxygen (O2), Combustibles (LEL), Carbon Dioxide (CO2) and Volatile Organic Compounds (VOCs)... Read More

Read more about M SQUAD The mSquad System is a quickly-deployable set of mobile multi-gas meters that communicate wirelessly to a Squad leader up to 0.8 km (0.5 miles) away.... Read More

Read more about iBrid MX6 The display improves safety with clear readings in low-light, brightlight or anywhere in between. Whether the work is outside, inside or underground, it’s easy to see what gas hazards lurk... Read More

Read more about Ventis Pro 5 In your line of work, a day on the job can turn from habit to hazard in a single moment. Be ready for anything with the Ventis™ Pro Series Multi-Gas Monitors.... Read More

Read more about BW Solo BW™ Solo is an easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers...... Read More

Read more about GX-3R Pro 'The GX-3R Pro is the worlds smallest 5 gas monitor weighing only 129 grams and fits in the palm of your hand (73 W x 65 H x 26 D mm). It simultaneously monitors and displays up to 5 different gases. ... Read More

Read more about GX-3R The GX-3R is the worlds smallest 4 gas monitor weighing only 110 grams and can comfortably be clipped within a workers breathing zone (55mm W x 64mm H x 26mm D). ... Read More

Read more about OXYBABY Med Once the OXYBABY® Med is connected at an outlet point the measuring starts and the result is immediately shown in the illuminated display. Not only is the type of gas checked but also the concentration and pressure of the gas being administered. The design and fabrication of the OXYBABY® Med is hygienically optimised, ensuring easy operation and focus on the job at hand. It also features an impressive integrated data log of the last 500 measurements for thorough documentation and export. For various connections an optional set of adapters is also available. ... Read More

Read more about D-Guard² D-Guard² offers world leading 2-wire loop powered NDIR methane and carbon dioxide monitoring capability, allowing greater numbers of detectors to be driven from smaller power supplies, reduced cable diameters... Read More

Read more about D-Guard²R D-Guard²R comes standard with a built in relay board. This includes 3 relays; 2 for the low and high alarms set within the transmitter and a third for fault. ... Read More

Read more about GX-6000 Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit... Read More

Read more about B-Guard Millennium CO2 Gastech Millennium infrared carbon dioxide detector is a single source dual wavelength instrument. The sensing and reference elements are self-compensating for optical integrity and other signal inhibitors. The industry standard 4-20mA analog output... Read More

Read more about Sensepoint XCD The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. ... Read More

Read more about Gastec Colourmetric Tubes Standard detector tubes are thin glass tubes with calibration scales printed from which you can directly read concentrations of the substances (gases and vapours) to be measured.... Read More

Read more about testo 350 The peak of the testo combustion analyser range lies in the 350. An industrial instrument that comprises of a control box and wireless control unit has a highly modular design allowing for a large variety of gases to be used. ... Read More

Read more about Airscan IRF9 The industrial refrigeration industry is changing rapidly. The manufacture of R-22 and other HCFCs are being phased out, and manufacturers of cooling systems are introducing new equipment that runs on 407a, 422d, 410a, NH3 and CO2.... Read More

Read more about Ax60K Carbon dioxide (CO2) is stored and used in fast food kiosks for the carbonation and dispense of beverages. CO2 is a toxic gas that is colourless and odourless and not detected by human senses.... Read More

Read more about A50 CO2 Detector (Discontinued) The Experts in Beverage and Hospitality Gas Safety. This plug and play CO2 detector is simple to wall mount in the area where CO2 is stored or piped and will provide audio/visual alarms should there be a leak which exceeds permissible... Read More

Read more about H-Guard The H-Guard is a CO2 transmitter series designed to be installed in HVAC applications. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More

Read more about H-Guard-D The H-Guard-D is a CO2 transmitter series designed to be installed in HVAC return air ducts. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More

Read more about H-Guard-L The H-Guard-L is a CO2 transmitter series designed to be installed in HVAC applications. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More

Read more about Honeywell IAQPoint2 (Discontinued) High levels of CO2 can cause drowsiness and create an inefficient work environment for building occupants. To combat this problem, building managers may run the ventilation... Read More

Read more about ToxiRAE Pro CO2 The ToxiRAE Pro CO2 is the world’s first wireless personal carbon dioxide monitor. It provides safety professionals with wireless remote access to real-time instrument readings and alarm status for better visibility and faster... Read More

Read more about AX60+ The CO2 and O2 sensors are interchangeable and can be fully integrated as part of a multi-point, multi-gas detection and alarm system. The CO2 sensor is set by default to trigger a low-level alarm at 1.5% CO2, an evacuation alarm at 3% CO2 and a time-weighted average alarm of 0.5% CO2 measured over eight hours... Read More

Read more about ACG+ The ACG+ offers the user peace of mind as it continually monitors Oxygen (O2), Carbon Dioxide (CO2), Carbon Monoxide (CO), dew point (H2O) and Volatile Organic Compounds (VOC) and... Read More

Read more about MeshGuard Wireless The RAE Systems MeshGuard gas detection monitor is a key building block of the MeshGuard intelligent network of connected sensors for gas detection in industrial safety and oil and gas applications.... Read More

Read more about MultiRAE Pro The MultiRAE Pro is the industry’s only portable wireless multi-threat monitor. The MultiRAE Pro’s ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce ... Read More

Read more about MultiRAE Lite The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features... Read More

Read more about MultiRAE The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options... Read More

Read more about GasAlertMicro5 Series (Discontinued) Simultaneously monitor and display up to five atmospheric hazards with the GasAlertMicro 5. Adaptable to a variety of applications, the GasAlertMicro 5 has an extensive selection of user-settable field options ... Read More

Read more about Atmos Room Monitor (Discontinued) Atmos is a wall mounted device for controlled atmosphere. It should be installed where gas variation of concentration can put workers’ safety at risk, or where gas concentration is to be monitored continuously for ambient storage conditions.... Read More

Read more about CO2 Meters CO2 Detector (Discontinued) CO2 alarms are critical in breweries, wineries, beverage dispensing areas, restaurants, fast food establishments, dry ice storage, CO2 storage tanks, laboratories, or anywhere CO2 is stored or produced in high volume.... Read More

Read more about FI-21 (Discontinued) The Gas Detector Model FI-21 is a precision gas analyser which is adapted to measure the % volume concentration of any of the commonly used gas in a mixture of air or oxygen for solvents, fumigation, gas purity and anaesthetic gas.... Read More

Read more about Dosimeter Tubes Gas or Vapour to be Measured Chemical Formula Gastec Tube No. & Name Measuring Range (ppm) Measuring Time (hours) Shelf Life (year) Note TLV-TWA,C (ACGIH) (ppm) Acetaldehyde CH3CHO... Read More

Read more about Polytec Tubes The Polytec Tubes provide easy and cost effective way of gas detection in hazardous environment. The Polytec tubes can be used to determine multiple unknown substances with a single test.... Read More

Read more about testo 320 (Discontinued) The new testo 320 is a high-quality measuring instrument for efficient flue gas analysis. Its wide measuring range makes it a reliable partner for eliminating malfunctions and emergencies, monitoring legal limit values or for daily routine work... Read More

Read more about testo 310 The new flue gas analyzer testo 310 combines simple functions with a high level of measurement accuracy, and is therefore perfectly suited to all basic measurements on a heating system. Long battery lifetimes of up to ten hours guarantee high... Read More

Read more about Eagle 2 (Discontinued) The Eagle 2 is the newest member of the Riken family. Equipped with features that are not available on competitive units, the EAGLE 2 is a powerful instrument that does more than just offer the standard confined space protection.... Read More

Read more about Eagle (Discontinued) The EAGLE is a powerful instrument that does more than just offer the standard confined space protection for LEL, O2, H2S and CO. Detection combinations never before offered in a portable gas monitor are now available featuring... Read More

Read more about Pocket CO2 Monitor and Datalogger (Discontinued) Normal indoor air quality levels are shown by Green (good), Yellow (normal) and Red (warning) LEDs. If dangerously high CO2 levels are detected, the meter will alert the user to immediately seek fresh air with a combination of flashing, audible and vibrating alarms... Read More

Read more about Testo 330 (Discontinued) The major advantage of flue gas analysers lie in their dialog feature: instrument diagnosis provides information about the qualitative status of functions at the touch of a button.... Read More

Read more about GasCheck G (Discontinued) Designed for the search and location of gas leaks, GasCheck G has an advanced micro thermal conductivity sensor for fast, effective detection of almost any gas or gas mixture. Robust and reliable, GasCheck G provides a stable response...... Read More

Read more about PHD6 (Discontinued) The GasTech PHD6 is a state of the art multi-gas detector. It’s the most configurable gas detector of its time with 5 sensor ports, up to 6 channels of detection, and 18 sensor options including electrochemical, LEL, PID and Infra-Red.... Read More